Tech-source Raptor 4000 (for Solaris) User Manual download pdf (Page 31)

type the following command:

ok nvedit

0: devalias screen1 \

/pci@1e,600000/pci@0/pci@3/pci@0/TSI,rapafp@0

3. Type <Control-C> to exit the nvedit mode.

4. To store your new settings type:

ok nvstore

5. The variable use-nvramrc? must also be set to true in

order for the configuration in nvram to take effect.

To set this variable to true type:

ok setenv use-nvramrc? true

6. Save your settings and reset the system by typing:

At the ok prompt, type :

ok reset-all

8. Once the system is reset, all console messages will be

directed to the Raptor 4000/4000e card.

NOTE: Replace # with the digit representing your Raptor’s PCI

slot number.

NOTE: To restore the default graphics device as the console

when using the video-mode method, set the use-nvramrc?

variable to false as given below:

ok setenv use-nvramrc? false

ok reset-all

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 40 41

No comments

Tech-source Raptor 4000 (for Solaris) User Manual Page 31