Tech-source Raptor 4000 (for Solaris) User Manual download pdf (Page 27)

Appendix A

CHANGING THE CONSOLE

RESOLUTION

A.1 Overview

The Raptor 4000 series cards can be configured to be the console

in a typical SPARC desktop/server. The card has a default

console resolution and default depth as shown in the following

table:

Board Resolution Refresh Bits/Pixels Sync

4000

4000e

Auto Detect

Separate/composite

It is possible to change the default resolution on a Raptor

4000/4000e card. The procedures described in this appendix are:

• EDID Auto-Detect feature

• Output Device Method

• Video-Mode Method

• Video-Timing Method

This appendix includes a troubleshooting section describing

possible problems and answers associated with changing the

console resolution.

A.1.1 Reason for Changing the Console

Resolution

Normally the default console resolution is sufficient for most users.

An example of when you might be required to change the default

resolution is described below:

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 40 41

No comments

Tech-source Raptor 4000 (for Solaris) User Manual Page 27